View previous topic :: View next topic |
Author |
Message |
graham At rest
Joined: 06 Dec 2008 Posts: 744 Location: Wanguri NT
|
|
Back to top |
|
tortron Got the hang of this ...
Joined: 02 Mar 2008 Posts: 280 Location: New Zealand
|
Posted: Wed Jul 29, 2009 1:06 pm Post subject: |
|
|
you can justabout use anything as the duct
i know a guy using a denim tube (what was once an old pair of jeans) in his citron, it happens to be pretty similar to what was originally used.
I am using some spring rubber tube in my morrie. Tho you could probably find a correct sized silver air ducting somewhere
|
|
Back to top |
|
william ballard valued contributor
Joined: 27 Jan 2008 Posts: 284 Location: Dubbo
|
|
Back to top |
|
Shawn Full Licence
Joined: 16 Sep 2005 Posts: 385 Location: Redlands, Brisbane, Australia
|
Posted: Wed Jul 29, 2009 4:08 pm Post subject: |
|
|
Vacum cleaner hose is good for ducting. I've squished the screen end, drilled two small holes in the fold under the dash and zip tied the duct in place. It's not airtight by any means, but works pretty well.
|
|
Back to top |
|
Mark learning to change gears
Joined: 01 May 2009 Posts: 47 Location: Perth
|
Posted: Wed Jul 29, 2009 6:58 pm Post subject: |
|
|
When my minor get pulled off the road and restored I am thinking of taking the heater out of my Midget (who needs a heater in a convertible) and putting it in the morrie, it should fit in the engine bay, the fan is built in the unit, all I have to do is duct it into the car, I could do it through the vents
|
|
Back to top |
|
53s2mm Got the hang of this ...
Joined: 25 Nov 2005 Posts: 215 Location: minto N.S.W.
|
Posted: Thu Jul 30, 2009 4:26 pm Post subject: |
|
|
hi graham go to your mower shop and get some tube that goes between the air filter and the carb on victa mowers you may need two
brian
|
|
Back to top |
|
|