Morris Minor ShopMorris Down Under Forum Forum Index Classic Car Trader
Log in Register FAQ Memberlist Search Morris Down Under Forum Forum Index

Wipers

 
Post new topic   Reply to topic    Morris Down Under Forum Forum Index » Electrics, Instrumentation & Security
View previous topic :: View next topic  
Author Message
John Ballard
valued contributor


Joined: 11 Feb 2004
Posts: 2646
Location: Dubbo NSW

PostPosted: Sun May 03, 2020 6:53 pm    Post subject: Wipers Reply with quote

Just about finished my wiring to day on the Ute new loom plus these extras
Daytime running lights
Driving lights
Engine bay lights
Rear tub lights
Indicators
Hazard lights
Radio
USB charger
Whilst doing body work changed my wipers tp parallel sweep with a Mini two speed motor, only problem 105 degree wheel in motor too big a sweep comes about 140ml off the drivers side windscreen pillar.
So anyone know correct wheel for parallel wipe have heard of 100 degrees but thing it could be less


Back to top
View user's profile Send private message Send e-mail
John Ballard
valued contributor


Joined: 11 Feb 2004
Posts: 2646
Location: Dubbo NSW

PostPosted: Mon May 04, 2020 7:06 pm    Post subject: Reply with quote

Took a bit of sorting to get the Lucas two speed toggle switch right so here tis,
Term 2 park
Term 5 low
Term 8 high
Term 4 earth/frame
This for a Negative earth car.
Now the motor I found out the Minor needs a 22mm stroke so I took the gear wheel out drilled the pin out a refitted it to the disc 11mm from centre with a little weld underneath
Bench test measurement says I have a 22mm stroke . will refit tomorrow


Back to top
View user's profile Send private message Send e-mail
John Ballard
valued contributor


Joined: 11 Feb 2004
Posts: 2646
Location: Dubbo NSW

PostPosted: Tue May 05, 2020 7:52 pm    Post subject: Reply with quote

So now fitted and the sweep seems perfect , just holding an arm on as windscreen not in yet


Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Morris Down Under Forum Forum Index » Electrics, Instrumentation & Security All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001- 2004 phpBB Group
Theme created by phpBBStyles.com | Themes Database