Morris Minor ShopMorris Down Under Forum Forum Index Classic Car Trader
Log in Register FAQ Memberlist Search Morris Down Under Forum Forum Index

speedo

 
Post new topic   Reply to topic    Morris Down Under Forum Forum Index » Electrics, Instrumentation & Security
View previous topic :: View next topic  
Author Message
gazza1
valued contributor


Joined: 07 Oct 2003
Posts: 53
Location: adelaide south australia

PostPosted: Sat Apr 08, 2006 4:45 pm    Post subject: speedo Reply with quote

hi all. the artical on the datson conversion was great. some of the artical is almost as i am doing mine but i would like to ask one question.the speedo as scott did with the garden hose works exelant but the datson cable at the speedo end doesnt match the speedo drive so what do you do to remerdy that part of the conversion. thank for you help Blue Ute Blue Ute Blue Ute


Back to top
View user's profile Send private message Send e-mail
Scouse
moderator


Joined: 15 Sep 2003
Posts: 5266
Location: Wollondilly, NSW

PostPosted: Mon Apr 10, 2006 8:07 am    Post subject: Re: speedo Reply with quote

gazza1 wrote:
the datson cable at the speedo end doesnt match the speedo drive
I haven't come across that problem before.

Is the inner cable actually reaching the speedo drive OK (not falling short ?).
Maybe the cable or speedo are worn.....

Have you tried taking off the cable at the gearbox end, making sure the cable is pushed right in & giving the cable a spin ?


Back to top
View user's profile Send private message
gazza1
valued contributor


Joined: 07 Oct 2003
Posts: 53
Location: adelaide south australia

PostPosted: Mon Apr 10, 2006 8:42 am    Post subject: Reply with quote

hi scott the drive end of the cable to the speedo reaches ok but the square drive on the end is smaller than the drive in the back of the speedo so i need to do something to make up the differance any ideas thank you


Back to top
View user's profile Send private message Send e-mail
Scouse
moderator


Joined: 15 Sep 2003
Posts: 5266
Location: Wollondilly, NSW

PostPosted: Mon Apr 10, 2006 8:56 am    Post subject: Reply with quote

Is the speedo drive still square & not rounded ?
If it's OK, how about giving the cable end a clean in solvent to get rid of any grease, then building it up with araldite or similar. Once it's set, it can be filed down to suit the speedo.

It's the best I can think of on a Monday morning.

Years ago, I had a worn cable/speedo & I successfully cured it by using alfoil to take up the wear. I think the araldite method might be a better solution.


Back to top
View user's profile Send private message
gazza1
valued contributor


Joined: 07 Oct 2003
Posts: 53
Location: adelaide south australia

PostPosted: Mon Apr 10, 2006 9:28 am    Post subject: Reply with quote

thank you scott. this must be a problem with some model as i did hear from a morry freak ones that you had to get a square brass tube from some ware to adapt the two together but cant remember were or who it was that said about it so i guess you idea sounds good . i had though of solder to build up the square drive but arildite sounds ok to me. thank you


Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Morris Down Under Forum Forum Index » Electrics, Instrumentation & Security All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001- 2004 phpBB Group
Theme created by phpBBStyles.com | Themes Database